Eurol Geo-Max FE 5W-30

Fully synthetic UHPD motor oil, based on low SAPS technology

General Details

urol Geo-Max FE 5W-30 is a fully synthetic motor oil for commercial vehicles based on so called ‘low SAPS’ technology. This entails that sulphur, phosphorus and sulphated ash concentrations are reduced radically to protect the exhaust gas after treatment systems.

Eurol Geo-Max FE 5W-30 is applicable to a wide range of modern trucks, because it meets a wide performance spectrum. Eurol Geo-Max FE 5W-30 can also be used for engines without a diesel particle filter.

Eurol Geo-Max FE 5W-30 has fuel economy properties and because of the special additive technology, both the oil and the engine are kept clean in an unprecedented way. In Euro-IV, Euro-V and Euro-VI engines, the harmful exhaust gas emission is reduced.

Eurol Geo-Max FE 5W-30 is a so called ‘long drain’ oil and is therefore suitable for prolonged drain intervals, if allowed by the OEM and depending on working conditions and filtration methods, so it reduces maintenance costs.

Eurol Geo-Max FE 5W-30 can also be applied in older trucks with Euro-III engines, where ACEA E4 is prescribed.

Performance

Scania LDF-4

API CJ-4

ACEA E4

ACEA E6

ACEA E7

ACEA E9

MB 228.51

MB 228.31

MAN M 3677

MAN M 3477

MAN M 3271-1

Volvo VDS-4

Scania Low Ash

Renault RLD-3

Renault RLD-2

Caterpillar ECF-3

CES 20081

MTU type 3.1

MTU type 2.1

DDC PGOS 93K218

MAN M 3575

Mack EO-O PP

JASO DH-2

Deutz DQC IV-10-LA

MAN M3691

Typical Properties
Density at 20°C 0.8572 kg/l
Viscosity, kinematic at 100°C 12.1 cSt
Viscosity, kinematic at 40°C 70.8 cSt
Viscosity Index 169
Viscosity, dynamic (CCS) 5729 cP
Sulphated ash 1 wt%
Flash point 200 °C
Pour point -42 °C